RELATIONSHIP BETWEEN UREA DECOMPOSITION AND CELL CLASSES OF RESERVOIR PHYTOPLANKTON IN THE NORTH HAN RIVER SYSTEM

The influence of natural phytoplankton cell classes upon the response of urea decomposition was investigated in four reservoirs in the North Han River System. The decomposition rate of urea was 0.3 to 29.4 μ mol urea・m⁻³・hr.⁻¹ in the light and 0.2 to 14.9 μ mol urea・m⁻³・hr.⁻¹ in the dark. Much higher decomposition rates were observed at the eutrophic stations in Lake Euiam. The urea decomposition in the smaller fraction (25 μm). No differences in the ratios of urea decomposition to chlorophyll-a or photosynthesis among three fractions were observed. This might be mainly due to the difference in the standing crop of phytoplankton. These trends were no different between sampling areas and reservoirs. The greater part of urea decomposition was the phase of CO₂ liberation rate into the water. Eight to 50% of the urea decomposition was incorporated into the particulate phase in the light, but this was much lower in the dark. The results of the present study indicate that urea in reservoirs decomposes by phytoplankton rather than bacteria and the phytoplankton would be competitive to bacteria.Article信州大学理学部付属諏訪臨湖実験所報告 7: 31-40(1991)departmental bulletin pape

Nano encapsulation of Drug-loaded Lipid by Temperature induced Phase Transition

Pluronic nanoparticles (NPs) were prepared by means of a temperature-induced phase transition in the mixture composed of Pluronic F-68 and liquid Tween 80/soybean oil containing model drugs such as orlistat, caffeine, and ibuprofen sodium salt. Liquid soybean oil/Tween 80 was used as a solubilizer for model drugs, and Pluronic F-68 was the polymer that stabilizes liquid soybean oil/Tween 80 containing model drugs. Field-emission scanning electron microscopy and particle size analyzer were used to observe the morphology and size distribution of the prepared NPs. X-ray diffractometer was used to understand relationship between the crystalline state of the model drug and its solubility in the aqueous media. To observe the feasibility of Pluronic NPs as a drug delivery system, the release pattern of model drugs was observed

Nano encapsulation of Drug-loaded Lipid by Temperature induced Phase Transition

Pluronic nanoparticles (NPs) were prepared by means of a temperature-induced phase transition in the mixture composed of Pluronic F-68 and liquid Tween 80/soybean oil containing model drugs such as orlistat, caffeine, and ibuprofen sodium salt. Liquid soybean oil/Tween 80 was used as a solubilizer for model drugs, and Pluronic F-68 was the polymer that stabilizes liquid soybean oil/Tween 80 containing model drugs. Field-emission scanning electron microscopy and particle size analyzer were used to observe the morphology and size distribution of the prepared NPs. X-ray diffractometer was used to understand relationship between the crystalline state of the model drug and its solubility in the aqueous media. To observe the feasibility of Pluronic NPs as a drug delivery system, the release pattern of model drugs was observed

Removal of Zinc by the Moss Calymperes delessertii Besch

Studies were conducted to assess the capability of a moss, Calymperes delessertii Besch, to remove zinc from solutions. In the batch experiments, parameters studied included effect of pH and initial zinc concentration on sorption. A series of fixed bed experiments were performed to study the system under dynamic conditions. The bed depth service time (BDST) model proposedn by Hutchins was successfully applied to the system. The fixed bed experiments were also carried out using waste water from a zinc plating factory and results indicated that moss columns could be used in a clean-up system to remove zinc from electroplating waste water

Geodesic motions in extraordinary string geometry

The geodesic properties of the extraordinary vacuum string solution in (4+1) dimensions are analyzed by using Hamilton-Jacobi method. The geodesic motions show distinct properties from those of the static one. Especially, any freely falling particle can not arrive at the horizon or singularity. There exist stable null circular orbits and bouncing timelike and null geodesics. To get into the horizon {or singularity}, a particle need to follow a non-geodesic trajectory. We also analyze the orbit precession to show that the precession angle has distinct features for each geometry such as naked singularity, black string, and wormhole.Comment: 15 pages, 11 figure

High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes

The highly dynamic behaviour of ultrasonic bubble implosion in liquid metal, the multiphase liquid metal flow containing bubbles and particles, and the interaction between ultrasonic waves and semisolid phases during solidification of metal were studied in situ using the complementary ultrafast and high speed synchrotron X-ray imaging facilities housed respectively at the Advanced Photon Source, Argonne National Laboratory, US, and Diamond Light Source, UK. Real-time ultrafast X-ray imaging of 135,780 frames per second (fps) revealed that ultrasonic bubble implosion in a liquid Bi-8 wt. %Zn alloy can occur in a single wave period (30 kHz), and the effective region affected by the shockwave at implosion was 3.5 times the original bubble diameter. Furthermore, ultrasound bubbles in liquid metal move faster than the primary particles, and the velocity of bubbles is 70 ~ 100% higher than that of the primary particles present in the same locations close to the sonotrode. Ultrasound waves can very effectively create a strong swirling flow in a semisolid melt in less than one second. The energetic flow can detach solid particles from the liquid-solid interface and redistribute them back into the bulk liquid very effectively

Long-term starin monitoring data of jacket-type offshore structure for tidal current power generation under severe tidal current environments

Structural strain responses of the jacket-type Uldolmok tidal current power plant structure under severe\ud tidal environments were analyzed using long-term measurement data from construction to normal operation. From the\ud measured data during construction, it was found that there were significant changes in strain responses at the steps of\ud jacket lifting, weight-block loading, pile ejection and insertion. Strains due to permanent and tidal current loads were\ud analyzed during removal work on one among six jacket legs, and it was found that the strains due to permanent load\ud were much significantly changed after removal of on jacket leg. From the measurement data during normal operation, it\ud was observed that strain responses were obviously fluctuated with M2 and M4 tidal periods and also with relatively\ud short period of about 11 min due to the peculiar tidal characteristics in the Uldolmok strait